Monday, April 8, 2013

REPOST: Magsafe 2 review (and the differences between them)

Magsafe 2 review
magsafe types labled
Apple has come out with the new Magsafe called "Magsafe 2" In reality, it has actually gone through 4 revisions.  But we guess the reason why it's considered the "Magsafe 2" is because the actual magsafe tip is narrower from top to bottom and a bit wider to accommodate the slim Macbook Airs and the New Macbook Pro retina laptops. The “L” shaped Magsafe is a direct replacement for the original Magsafe and will fit ALL MacBooks, EXCEPT the Magsafe 2 can ONLY be used for the new Macbook Pro Retina and mid 2012 Macbook Air.

Other then the new size of the "Magsafe 2" there is also another minor change in the voltage output of both the 85w model and the 45w models.  
The new 85w model is actually 20v at 4.25A.  The old was 16.5 - 18.5 at 4.1A.  The New model is set at 20v constant, while the old 85W is actually 60w, but powers up to 85w if the Macbook needs it.
The Macbook Air is 14.85v at 3.05A.   The old was 14.5 at 3.1A.  Not a whole lot different there.

For those who are planning on upgrading to the new "Magsafe 2", you can probably continue using the our old car adapters, but you might come up short of you are a high CPU user. All you'd need to do is purchase the just the  "Magsafe 2" cable and plug in the car adapter that you already have from us.  Since you just got a brand new Macbook, why no purchase a new car adapter since we will be shipping our adapters with the higher voltages with the "Magsafe 2" cables?
For our existing users, please contact us before you do however, most of you have adjustable voltage adapters and it could simply mean a different voltage selection.

Until next time, Happy charging and powering your Macbook Air and Macbook Retina display on the road (Retina display is gorgeous isn't it?)!

Mikegyver.com

Sharing adapters between different Macbook families.


Hello,

Recently we were asked about sharing a single adapter across MacBooks, ie. using the same adapter for both the Macbook Pro and Macbook Air.

Officially:  Two separate adapter such as our compact adapters or a universal adapter that can output two different voltages.
If you are using our universal adapter that can output multiple voltages, then all you need is two magsafe cables.  One for the MBA and one for the Macbook Pro.

Unofficially:  Just one adapter will work.  Choose the one for the Macbook.
Why?  The MBA max input voltage is 14.5v, the MBP is 18.5v.  The MBA can take 16.5v, and the MBP operates at 16.5v most of the time.  So 16.5v is a happy median between the two.  The only time you'll have issues is if your MBP is running full speed, then you'll need the 18.5v (85w) adapter.

The 85w apple adapter runs at 16.5 volts most of the time, it is only when you are running full speed, then it'll automatically step up to 18.5v.  If you have the MBA plug into the 85w, it'll only go up to 16.5v.

Now having said that, you still need to have separate cables if you are using the new MBA that has the new slim "T" style.  The new Magsafe2 are not compatible with the old style Magsafe cables.

Please see our Blog here about the different magsafe cables.

Mikegyver.com

Wednesday, April 3, 2013

REPOST: 12v Car, Boat, RV Mac Mini 2010 and newer how to...







Update 4-26-2016:  We have since suffered sort of a crash and cannot recover the photos below.  Instead, we're going to just post a picture that we just took from our Mac Mini stored on our shelf.
Hope this helps, as we recently received a email asking for wiring details.




Warning: The following steps are to be performed by those competent in soldering and electronics. The following step WILL very likely VOID your warranty. We will also take NO responsibility for any damages that you might incur.

Ok, so here’s how we did it, however we don’t like re-inventing the wheel (rather then to improve on it) we going to refer you to ifixit.com on disassembly first.

http://www.ifixit.com/Teardown/Mac-Mini-Model-A1347-Teardown/3094/1

Please do steps 1-14, and 22. Then come back here.














After you have disassembled your Mac mini, remove the power supply and re-assemble everything like so. Reconnect the power supply on the outside of the Mac Mini.

1) Cut the positive wires, and the Negative wires. Note the Middle wire:


2) Solder Pos wires together, and solder Neg wires together.


3) Find a wire and solder to it to make leads longer:


4) Solder the other end of the wire to a Panel mount DC jack:


5) Run it to the back of the Mac Mini where the AC cable used to plug in:


6) Find a Car cig plug (we sell them) and solder it to a 2.1mm plug:


7) Here’s how it looks fully assembled.


8) Plug in to the Mac Mini and you’re done!

NOTE: We tested with operating voltages of 10v all the way up to 15vdc, however we STRONGLY recommend you use a voltage regulator.  Please contact us.


For those who don’t want to do this yourselves, please go here

Mikegyver.com






Thursday, March 21, 2013

Now available: Microsoft Surface External Battery & Car Adapter Charger


Looking for an External battery adapter for your Surface Tablet computer? Look no further!

surfacebatterysm

surface-tablet


They are here now!

Mikegyver.com

Friday, March 15, 2013

Phorce bag

We'd like to welcome Phorce bag users!

Thank you for your order. Your order is all set, however we can only ship when we get the final specs from Phorce.

We're sure you are getting updates from Phorce and we are excited to begin shipping soon!

Power to the Phorce!

Tuesday, March 12, 2013

World's First portable Battery operated WiFi Camera


Check out the The World's Smallest Portable battery operated WiFi Camera.

I hung this on my dog's collar and had a great time seeing what he saw!

IMG_5461z

Transporter is an online but off-cloud storage device...


Coming Soon!Transporter is an online but off-cloud storage device for sharing, accessing and protecting unlimited amounts of files without using the cloud.