Update: Phorce bag users

Great news!

We are shipping he Magsafe cable for the Phorce bag.
Many have already received their order. If not, it's on it's way. If you just need status update please email us.

There are also some who asked if they can just buy the connectors and do it themselves. Here they are.

Finally, there are some who are asking if they can switch to using the Phorce bag with the new Microsoft Surface tablet. You cannot directly power the Surface directly from the Phorce unless you use an car adapter. The Surface requires less power.
That adapter can be found here, but you'll still need to have the phorce connector to Female Cigarette jack. Please check back as we are looking to offer this solution to you.




Mikegyver.com

How to build your own Phorce cable

Hello,

Some of you have asked so we decided to post pictures on how to make your own magsafe cable for the Phorce bag. We take no responsibility if you've wired up wrong or damaged your devices!

The part numbers are:KPPX-4P
2.15K Resistor

Let's get started.

Assembly instructions... We had to practice a few times to get this right, so hope you find the included detailed instructions below helpful!

Positive wire goes to Pin1, Neg to Pin2. Resistor 2.15k resistor to Pins 3 and 4.



First assemble the enclosure and the Strain relief as so.

Slide on the enclosure, springs, and plastic guide in this order.

Pos to pin1, and Neg to pin2

Resistor to pins 3 and 4

Slide in the circular notch

Slide on the Arm.
Crimp wire

Put on Top metal Cover.
Slide on the Spring.
Snap on the plastic enclosure, notice notch side up.

Snap on Plastic Coupling



Mikegyver.com